Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Mold Remediation for Fort Lauderdale Homeowners
Mold in a Fort Lauderdale home is not a cosmetic problem you can scrub away and forget. Our subtropical humidity means moisture never truly leaves on its own, and mold that starts behind drywall in Victoria Park or under a vanity in Coral Ridge keeps feeding until the moisture source is gone. Marsh Water Damage Fort Lauderdale has handled Mold Removal and full remediation for Broward County homeowners since 2005, and we have seen almost every scenario this climate can produce. Tobias Reyner leads our local team with the same approach on every job: a written price before work begins, technicians sent by name and photo before they knock, and a 365-Day Done Right Promise printed on the work order. If you suspect mold, call (754) 755-2815 and a live person answers, day or night.
Mold Removal Service
A Mold Removal Service addresses surface mold that has already established itself on visible materials like drywall, baseboards, tile grout, or wood framing. You need this when you can see dark spots, smell a musty odor that does not fade, or have had a leak in the past six months. Marsh Water Damage Fort Lauderdale physically removes contaminated material rather than just painting over it, then sets drying equipment from Dri-Eaz and XPOWER to pull residual moisture from the affected area. Most residential mold removal in Fort Lauderdale runs between $1,200 and $3,800 depending on the square footage affected and how long the moisture has been active.
Surface Mold on Drywall and Trim
South Florida drywall is a mold magnet when humidity sits above 60 percent for sustained periods. We cut out affected sections, bag the debris in containment, and inspect the framing behind the drywall before deciding what else needs attention.
Mold on Fixtures and Grout Lines
Bathrooms in older Fort Lauderdale homes often show recurring mold on shower tile and around tub surrounds. We remove the contamination and identify the ventilation issue behind it, so the problem does not come back in eight weeks.
Restoration work we handle
Mold Remediation Services
Mold Remediation Services go beyond surface removal to address the moisture engine driving the growth: hidden plumbing leaks, poor drainage, failed vapor barriers, or recurring condensation. We recommend remediation when mold covers more than 10 square feet, appears in multiple rooms, or returns after surface cleaning. Our team contains the affected zones, filters the air with commercial HEPA units, removes contaminated materials, and applies antimicrobial treatments. Mold Remediation in Fort Lauderdale on the three most common scenarios, single bathroom, laundry closet, and under a kitchen sink, typically runs $2,500 to $7,000, with the full scope written and priced before any demo starts.
Containment and Air Filtration
During remediation, disturbed mold releases spores that can travel through a home’s AC system within minutes. We build containment barriers and run continuous air filtration so bedrooms and living spaces stay protected while we work.
Root Cause Correction
If mold is growing behind a wall and we remove the drywall but ignore the pinhole leak in the supply line, we have not fixed anything. Our process includes finding and correcting the moisture source that fed the growth, whether it is plumbing, a roof penetration, or condensation from an uninsulated duct in a hot attic.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal
Professional Mold Removal is the difference between treating what you can see and eliminating what is actually there. The mold you notice on a baseboard often traces back to a much larger colony hidden behind the wall cavity, where the temperature and humidity are perfect for expansion. Marsh Water Damage Fort Lauderdale pairs moisture meters with thermal imaging to map the full affected area before we quote, so the price you approve covers the actual job, not just the visible spots. Professional mold removal in Fort Lauderdale homes runs $1,500 to $5,000 in most cases, with larger multi-room jobs priced in the written scope before work begins.
Moisture Mapping Before Removal
We use infrared cameras and penetrating moisture meters from Dri-Eaz to find where water has traveled behind surfaces. A stain on one ceiling tile often means wet insulation two feet away, and the only way to know for certain is to measure, not guess.
HEPA Filtration During Work
Mold removal that does not filter the air sends spores into every room connected by the HVAC system. We run HEPA air scrubbers from XPOWER throughout the job, and we leave them running for 24 to 48 hours after cleanup is complete.
Mold Inspection
A Mold Inspection identifies whether mold is present, where it is concentrated, what type it is, and what moisture source is feeding it. You need an inspection when you smell something musty but cannot find the source, when you have had water damage and want to confirm the structure dried properly, or when you are buying a home in Fort Lauderdale and do not want to inherit a hidden problem. Our inspection includes visual assessment, moisture readings, humidity measurement, and air sampling when the situation calls for it, and we explain the results in plain language, no jargon. Inspections in Fort Lauderdale typically run $350 to $700, and we deduct that cost from remediation if you hire us to fix what we find.
What the Inspection Report Tells You
You will get a written report showing where moisture readings are elevated, what materials show fungal growth, and what the lab results on any air samples mean. We tell you what needs attention now, what can wait, and what is not mold, because staining that looks like mold often is not.
Post-Remediation Verification
After we remove mold and dry the space, we run another round of readings to confirm the structure is genuinely dry at depth, not just on the surface. This verification is the piece most companies skip, and it is why we stand behind every job with a full year of coverage.
Mold Removal Specialist
A Mold Removal Specialist is someone who has trained specifically in fungal contamination, containment protocols, and moisture science, not a general handyman who also does mold. Our technicians hold IICRC, RIA, and IFA credentials in mold remediation and water damage restoration, which represent the recognized certification bodies for this industry. Tobias Reyner has built the Fort Lauderdale team around experienced leads who can read moisture patterns in a South Florida home the way a mechanic reads an engine. Specialist-level mold removal here runs $1,800 to $6,500 depending on containment requirements and material replacement.
Credentials You Can Verify
Every technician who enters your home is background-checked, identity-verified, uniformed, and photo-badged under the Threshold Verified standard. You will know exactly who is coming before they arrive, and they will show that badge at the door, every single time.
Direct Communication Throughout
You work with a lead technician who can explain findings, answer questions, and make scope decisions without calling a distant office. When something changes mid-job, because remediation sometimes reveals hidden issues, you hear about it in person from someone who knows what they are looking at.
Black Mold Removal
Black Mold Removal refers specifically to Stachybotrys chartarum, a toxic mold species that grows on consistently wet cellulose materials like drywall, ceiling tile, and cardboard. You need professional black mold removal when lab results or visual evidence confirm this species, because improper removal releases spores that create serious respiratory risk for anyone in the home. Marsh Water Damage Fort Lauderdale treats black mold with the same containment, filtration, and removal protocols we use on hospitals and commercial buildings, adapted for residential scale. Black mold removal in Fort Lauderdale homes typically runs $2,800 to $8,000, with the higher end reflecting larger containment zones and more extensive material removal.
The Containment Difference
We remove black mold inside sealed containments with negative air pressure, which means air always flows into the work zone, never out into your living spaces. Spores cannot travel through an HVAC return or under a doorway when the pressure differential is set correctly.
Material Disposal Done Right
Black mold contaminated drywall, insulation, and carpet get bagged in 6-mil poly sealed within the containment before removal. We transport the debris through the shortest, most direct exit path to prevent cross-contamination of clean areas, which matters more than most people realize.
Mold Removal Contractor
A Mold Removal Contractor is a licensed, insured restoration company that handles the entire scope: inspection, containment, removal, drying, antimicrobial treatment, and repair of the materials removed. You need a contractor rather than a handyman when there is any chance the mold has penetrated building cavities or when insurance is involved. Marsh Water Damage Fort Lauderdale is licensed, insured, and bonded, and we work directly with insurance adjusters, providing photo documentation and written scope reports that meet claim requirements. Fort Lauderdale mold removal contractor pricing starts around $1,500 for small isolated jobs and runs $5,000 to $9,000 for full room remediation with rebuild.
We Handle Your Insurance Claim Directly
We document the moisture damage with photos, moisture readings, and written findings that your adjuster needs to approve a mold claim. Then we talk to the adjuster ourselves, which saves you the worst part of the process: relaying technical information back and forth.
Written Scope Before Any Demo
Every job gets a written price before any material is removed, and that price does not balloon halfway through. If we find additional damage behind a wall, we show you, explain what changed, and get your written approval before proceeding.
Bathroom Mold Removal
Bathroom Mold Removal targets the most common mold location in Fort Lauderdale homes because bathrooms combine moisture, warm air, and often poor ventilation into one small space. You need it when you see mold on caulk lines, behind toilets, under sink cabinets, or on ceiling areas above showers. We remove contaminated drywall, caulk, grout, or cabinet materials, then evaluate your exhaust fan and venting, because a bathroom with a weak fan will grow mold again no matter how thoroughly you clean. Bathroom mold removal in Fort Lauderdale usually runs $900 to $3,200 depending on whether walls, ceilings, or cabinetry need to be opened up.
Shower and Tub Surround Mold
Mold that lives in the caulk line or on grout usually means water has gotten behind the surface layer. We remove the failed caulk or grout, inspect the backer board behind it, and repair or replace materials before re-sealing.
Under-Sink and Vanity Mold
Slow leaks from supply lines or drain fittings sit in the dark cabinet base for months before anyone sees the staining. We pull the vanity base, check the wall cavity behind it, dry everything with targeted airflow, and replace what cannot be saved.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We run our drying and air filtration equipment from Dri-Eaz daily, and our techs know the settings and airflow calculations that make these units perform at their rated capacity. Whether we are placing the Dragon mobile dryer or the HEPA 700 air scrubber, placement and setup matter as much as the machine itself, which is why every lead tech is trained on the full Dri-Eaz line.
Our air movement and HEPA filtration setups use XPOWER equipment alongside our Dri-Eaz fleet. In Fort Lauderdale attic spaces and crawl zones, we rely on XPOWER axial fans to move air through tight spaces where mold tends to hide after a roof leak or condensation event. Whether you are dealing with a first-floor bathroom or a third-floor attic space, we have the right equipment for the job.
Signs You Need a Pro Right Now
- Musty smell that never goes away. That odor is microbial volatile organic compounds off-gassing from mold colonies, and if you smell it constantly, the colony is active and growing. Air fresheners mask it; only source removal eliminates it.
- Dark spots spreading on walls, baseboards, or ceilings. Mold stains that grow week over week mean the moisture supply behind them has not stopped. Surface cleaning will not fix what is feeding the colony.
- Past water damage that was never professionally dried. A leak or flood that was mopped up but never dried with proper airflow leaves drywall and flooring wet at depth for weeks. Mold appears 7 to 14 days later, often behind the materials where you cannot see it yet.
- Discolored grout or caulk that keeps coming back. Mold embedded in grout pores or behind caulk means water has penetrated the waterproof layer. Re-caulking over it seals the mold in and lets it spread behind the surface.
- Allergy symptoms that worsen at home and improve when you leave. Unexplained respiratory irritation, coughing, or sinus pressure that lifts when you go to work or travel is a pattern worth investigating. Indoor mold exposure produces exactly this symptom profile.
Our Process, Step by Step
- 1
Inspection and moisture mapping. We start by finding every wetted surface using infrared cameras and penetrating moisture meters. The visible mold is rarely the whole story, and we will not quote a remediation without knowing what is behind the wall.
- 2
Written scope and price. You get a fixed written price for the full scope before any material is removed. This includes containment, removal, drying, treatment, and repair of removed materials.
- 3
Containment and air filtration. We seal the affected area with poly barriers and run HEPA air scrubbers on negative pressure. Mold spores cannot escape into the rest of your home while we work.
- 4
Removal and treatment. Contaminated materials come out in sealed bags through the most direct path. Then we treat the cavity and surrounding structure with antimicrobial agents and dry everything to verified moisture content.
- 5
Verification and the 365-Day Promise. We re-test moisture levels, run air samples when appropriate, and hand you the written guarantee. If the repair is not right within 365 days, Marsh makes it right, and your free second visit is included automatically.
How Much Does Mold Remediation Cost in Fort Lauderdale?
A typical mold remediation job in Fort Lauderdale runs $1,500 to $8,000 depending on the size of the affected area, how many rooms are involved, whether containment and air filtration are needed, and what materials must be replaced. Isolated bathroom mold removal is on the lower end around $900 to $3,200. Whole-room remediation with rebuild work runs $4,000 to $9,000. Black mold with full containment runs $2,800 to $8,000. What affects the price most is how far the moisture traveled behind surfaces, which is why we never quote without moisture mapping first. The best way to avoid overpaying is to review our Mold Remediation cost guide, get a fixed written price before demo begins, and ask whether the price covers repair of removed materials. Our estimates are free, and every quote includes the full scope in writing so there are no surprises later. Call (754) 755-2815 for an exact quote on your situation.
Our Service Area Near Fort Lauderdale
We serve the entire Fort Lauderdale metro area, including Mold Remediation in Hollywood, Mold Remediation in Plantation, Tamarac, Lauderdale Lakes, North Lauderdale, Cooper City, Pembroke Park, Broadview Park, Wilton Manors, Oakland Park, and Dania Beach. Most appointments within Fort Lauderdale city limits get same-day or next-day dispatch depending on severity. If you are outside the city center, call and we will give you an honest arrival window before you hang up. Our home base covers all of Broward County with full mold services.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Mold Remediation in Fort Lauderdale
Mold remediation is the full process of finding the moisture source, containing the affected area, removing contaminated materials, drying the structure, and treating surfaces so mold does not return. It differs from simple mold cleaning because remediation addresses the water problem behind the growth. In Fort Lauderdale, most remediation jobs also require correcting ventilation or drainage issues that allowed mold to start in the first place.
Most residential mold remediation jobs in Fort Lauderdale take one to three days of on-site work, with drying equipment running for 24 to 48 additional hours afterward. Larger multi-room jobs or black mold jobs with full containment can take four to five days. We give you a written timeline with the scope before any work begins.
Mold remediation in Fort Lauderdale runs $1,500 to $8,000 for most residential jobs, with bathroom mold removal on the lower end and full-room black mold containment on the higher end. The exact price depends on square footage, containment requirements, and replacement materials. Call (754) 755-2815 for a free estimate with a fixed written price.
Yes. We document every job with photos, moisture readings, and written scope reports that insurance adjusters need to process mold claims. Then we talk to your adjuster directly and handle the technical back-and-forth. You do not have to translate remediation terminology into claim language; that is our job.
Active water feeding mold is always an emergency because mold colonies expand by the day when moisture is present. If you have a leak that is still wetting building materials, call us at any hour. A live person answers 24/7, and we will tell you honestly whether the situation needs immediate dispatch or can wait until morning.
Every remediation job comes with the 365-Day Done Right Promise, a written guarantee printed on the work order. If the repair is not right within one full year, Marsh makes it right. A free second visit is included automatically, never something you have to argue for.
Clear the affected room of small items and personal belongings, especially anything porous like clothing, papers, or fabrics that could absorb spores during work. We handle furniture protection and containment for larger pieces. If you have pets or family members with respiratory conditions, plan for them to be out of the home during active removal.
Schedule Your Mold Remediation Service in Fort Lauderdale Today
Mold does not stall while you gather quotes, and in this humidity it grows faster than most homeowners believe. Call (754) 755-2815 today and a live person answers, any hour of any day. You will get a free, no-obligation estimate with a written price before work starts.
Written by Tobias Reyner, Owner at Marsh Water Damage Fort Lauderdale, serving Fort Lauderdale since 2005.